Velkommen til Cykelcafeen.dk!

Carbon Herre Mtb

Viser alle 11 resultater


  • This is the bike for you if

    The MTB-XC Lynx Race is an agile, lightweight and top-performing bike that competes in the XC World Cup. Its Split Pivot system guarantees maximum pedalling efficiency with a suspension system that works constantly and progressively.

    Its unique technology is

    The Lynx Race bike with 100 mm travel for XC and Marathons was built using HCIM carbon moulding technology that is used in BH Bikes’ high-performance road frames. It incorporates Toray T1100 and T800 carbon fibres.

    It’s different because

    It incorporates a technology for monocoque frames that applies high pressure in the mould to reach the highest levels of compact material and eliminate inconsistent pressures in the frame that create bubbles and imperfections. This manufacturing system allows control and optimisation of the ideal thicknesses on the different parts of the frame.

    SPLIT PIVOT

    This system allows for separate action on three forces produced on the bicycle: pedalling, braking and suspension. The result is maximum pedalling efficiency with consistent and progressive suspension. The advanced rear suspension of the Lynx allows it to have a greater range while being very lightweight.

    GEOMETRY

    A more aggressive geometry was developed through an advanced steering angle of 68.5º, a longer reach and an even more compact 426 mm rear triangle. All these elements offer the rider a better position while riding, improving the performance and making handling easier during descents. Press Fit 92 mm for maximum stiffness and minimal bending.

    PERFORMANCE CARBON LAY-UP

    Its manufacturing with P-CL carbon, incorporated into the Lynx Race RC Carbon range, achieves a frame weighing just 2,150 grams in medium size.

    BOOST 148MM & THRU AXLE 12MM

    It includes the new Boost 148 hub standard that together with the 12mm thru axle increases wheel rigidness and lateral rigidness by 20% and allows compatibility with 27.5″+ wheels. And a rear triangle of 426 mm to improve steering, performance and handling.

    CABLE GUIDE

    The cable guiding system is internal in the Lynx range In addition, they are equipped with the internal guiding for a dropper seatpost.
    The electronic gear change is fully housed and hidden. Using the patented «clip» system on the bottom bracket. It is discreet, lightweight, isolated from humidity and allows easy assembly.

  • ULTIMATE EVO

  • ULTIMATE RC

  • BIG.NINE CF3 FRAME

    XC focused carbon frame (approx. 1.29 kg BIG.NINE – M). Aero profiled down tube, leaf spring profiled chain and seat stays for comfort. BB92 bottom bracket. Boost axle standard and tapered head tube deliver stiffness and steering precision. ‘Smart Entry’ cable routing prevents rattling. Includes integrated down tube and chainstay protectors for extra frame protection.

    THIS IS WHAT WE DO

    Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship ‘Made in Taiwan’.

    MULTIPLE FRAME OPTIONS

    Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

    SIZE SPECIFIC WHEELS

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

    DROPPER POST READY

    All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    MODERN HARDTAIL GEOMETRY

    Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

  • BIG.NINE CF3 FRAME

    XC focused carbon frame (approx. 1.29 kg BIG.NINE – M). Aero profiled down tube, leaf spring profiled chain and seat stays for comfort. BB92 bottom bracket. Boost axle standard and tapered head tube deliver stiffness and steering precision. ‘Smart Entry’ cable routing prevents rattling. Includes integrated down tube and chainstay protectors for extra frame protection.

    THIS IS WHAT WE DO

    Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship ‘Made in Taiwan’.

    MULTIPLE FRAME OPTIONS

    Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

    SIZE SPECIFIC WHEELS

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

    DROPPER POST READY

    All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    MODERN HARDTAIL GEOMETRY

    Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

  • BIG.NINE CF3 FRAME

    XC focused carbon frame (approx. 1.29 kg BIG.NINE – M). Aero profiled down tube, leaf spring profiled chain and seat stays for comfort. BB92 bottom bracket. Boost axle standard and tapered head tube deliver stiffness and steering precision. ‘Smart Entry’ cable routing prevents rattling. Includes integrated down tube and chainstay protectors for extra frame protection.

    THIS IS WHAT WE DO

    Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship ‘Made in Taiwan’.

    MULTIPLE FRAME OPTIONS

    Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

    SIZE SPECIFIC WHEELS

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

    DROPPER POST READY

    All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    MODERN HARDTAIL GEOMETRY

    Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

  • BIG.NINE CF3 FRAME

    XC focused carbon frame (approx. 1.29 kg BIG.NINE – M). Aero profiled down tube, leaf spring profiled chain and seat stays for comfort. BB92 bottom bracket. Boost axle standard and tapered head tube deliver stiffness and steering precision. ‘Smart Entry’ cable routing prevents rattling. Includes integrated down tube and chainstay protectors for extra frame protection.

    THIS IS WHAT WE DO

    Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship ‘Made in Taiwan’.

    MULTIPLE FRAME OPTIONS

    Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

    SIZE SPECIFIC WHEELS

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

    DROPPER POST READY

    All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    MODERN HARDTAIL GEOMETRY

    Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

  • BIG.NINE CF3 FRAME

    XC focused carbon frame (approx. 1.29 kg BIG.NINE – M). Aero profiled down tube, leaf spring profiled chain and seat stays for comfort. BB92 bottom bracket. Boost axle standard and tapered head tube deliver stiffness and steering precision. ‘Smart Entry’ cable routing prevents rattling. Includes integrated down tube and chainstay protectors for extra frame protection.

    THIS IS WHAT WE DO

    Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship ‘Made in Taiwan’.

    MULTIPLE FRAME OPTIONS

    Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

    SIZE SPECIFIC WHEELS

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

    DROPPER POST READY

    All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    MODERN HARDTAIL GEOMETRY

    Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

  • THIS IS WHAT WE DO

    Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we were able to gain in 47 years of bike production and manufacturing. The BIG.NINE and BIG.SEVEN range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship ‘Made in Taiwan’.

    MULTIPLE FRAME OPTIONS

    Following in the footsteps of BIG.NINE/SEVEN TFS frame which was introduced in 2018, the SPEED frame also received a makeover for the 2019 season. The introduction of slim tube shapes creates a new look and a more relaxed geometry, through a shorter top tube and a higher head tube, resulting in a more upright riding position and enhanced trail visibility. The new frame also comes with IS brake mounts that are positioned within the rear triangle as well as with kickstand and fender mounts.

    BIG.NINE CF5 FRAME

    Superlight, using the highest quality carbon fibres and an EPS core (frame weight approx. 880 g BIG.NINE – M, including paint) making it one of the lightest frames in the market. Aero profiled down tube, leaf spring profiled chain and seat stays for maximum comfort. Boost axle standard and tapered head tube deliver stiffness and steering precision. ‘Smart Entry’ cable routing prevents rattling. Includes integrated down tube and chainstay protectors for extra frame protection.

    SIZE SPECIFIC WHEELS

    Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er.

    DROPPER POST READY

    All models down to the BIG.NINE LITE frame level feature a 30.9 mm seatpost, the enhanced connection area increases the strength around the top tube/seat tube join and allows the option of fitting a dropper seat post. Models down to BIG.NINE LIMITED allow internal cable routing for the dropper post while the remaining models would require external routing.

    SMART ENTRY

    Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

    MODERN HARDTAIL GEOMETRY

    Our carbon (CF) and aluminium (LITE) models feature a long 422 mm reach, steep 73,5° seat angle, slack 70° head angle and an 80 mm stem (frame size M), affording the next generation XC geometry. Aggressive agility meets stable calmness; perfect for today’s demanding courses.

  • eONE-SIXTY CFA FRAME

    Carbon front triangle with integrated battery technology, paired with 6016 rear end with aggressive enduro/trail geometry and 150 mm rear wheel travel – Shimano STePS E8000/E7000 motors allow for short chain stays delivering agility. Internal cable guide for rattle free running. Full carbon motor bracket creates an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor.

    SATELLITE POINTS

    The bike features a perfectly positioned satellite on/off switch, at the head tube end of the top tube, and a well-protected satellite charging port, positioned in the main frame triangle, just above the motor.

    INTERNAL BLOCK

    First introduced in our 2015 NINETY-SIX, the new version of the ‘Internal Block’ is incorporated directly in the frame and prevents the fork crown from hitting the carbon frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

    THERMO GATE

    Specifically located openings on the carbon eONE-SIXTY models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The ‘Thermo Gate’ enables the battery to perform at its best, in any condition.

    ENERGY GUARD

    A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.

    WATER CARRIER

    Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles of up to 0.75l to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

    CLEVER WHEELS

    To give the eONE-SIXTY precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5″ tyre and a 650B rear wheel, equipped with a slightly wider 2.6″ tyre. The perfect combination of precision, playfulness and traction.

    BOOST THAT RIDE

    ‘Boost’ standard front & rear. The extra 6 mm rear hub and 10 mm front hub spacing in comparison with conventional hubs brings the width up to 148 mm / 110 mm and gives the eONE-SIXTY wheels noticeably more stiffness and strength.

  • MODERN MARATHON GEOMETRY

    The ONE-TWENTY RC has a very low standover height, giving the rider ample space to manoeuvre when the terrain demands it. It slightly steeper seat and head angle (in comparison to the ONE-TWENTY) provides even more efficiency and a more marathon specific trail behaviour. The short travel rear
    end, make the bike an even more uncompromising climber than its bigger brother.

    ONE-TWENTY RC CF4 FRAME

    Full carbon frame incorporating ‘Nano Matrix’ technology for additional impact resistance. ‘Smart Entry’ cable clamping system for rattle free running. Tapered head tube for precise steering, Boost standard and rear through axle for rear end stiffness. The floating rear shock provides 100 mm of travel.

    LOCK THEM UP

    When hitting steam climbs in a marathon race, you want to be able to quickly lock out the front fork without taking your hands off the controls. So, all our ONE-TWENTY RC come with remote lockout, allowing you to lock out the fork from a leaver on your handlebars. The rear shock lockout is positioned on the shock to keep the cockpit clean and manageable.

    MARATHON FOCUS

    The more marathon focused version offers 100 mm of rear wheel travel combined with a 120 mm suspension fork, resulting in a steeper seat and head angle, making the RC even more pedalling efficient and more agile on twisty courses.

    FLOAT LINK SUSPENSION
    STEALTH DROPPER SEATPOST

    A dropper post is allowing the rider to get the saddle out of the way when the gradient gets steeper, giving him/her more space to manoeuver and control over their bike. The fitted dropper posts featuring internal cable routing and remote levers, creating a cleaner look and allowing easier ‘on the go’ saddle height adjustment.

    RACE PROVEN

    Not just race proven by the MULTIVAN MERIDA BIKING TEAM in their final 2016 season but still competed on by living mountain bike legends like Gunn-Rita Dahle Flesjå and José Antonio Hermida who are looking for lightning fast acceleration, great climbing and descending ability as well as super low weight.


Viser alle 11 resultater