The Kimera Prime Limited is the result of a super light and rigid frame and the best components. This bike is built for riding fast.
- The Kimera Prime Limited frame is produced with the highest percentage 40T High Modulus carbon, with the highest tensile strength properties. This results in a very light and stiff frame.
- Perfectly integrated, lightweight KOGA carbon front fork.
- Equipped with a one-piece full carbon stem and steering combination for extra aerodynamics.
Always in the right gear thanks to the wider range and closer progression from the brand new Sram Red eTap AXS groupset.
Sram Red eTap hydraulic disc brakes offers more control and provide greater stopping power under all conditions.
Light weight and stiff carbon Zipp 303 wheel set. The wheel set is mounted by means of a thru axle for extra stiffness.
Note: is supplied without Quarq powermeter
The cables run through the frame tubes and are therefore better protected from the influences of the weather. Moreover, the bike is easier to keep clean and has an improved, leaner appearance.
TAPERED HEAD TUBETapered ball head tube. The lower ball head tube has a larger diameter than the upper one. The larger diameter enables the possibility of a more rigid construction without adding weight, resulting in greater steering stability.
PRESS FIT BOTTOM BRACKETPress Fit bottom bracket. The bearings for the crankshaft are pressed into the frame. In addition to the weight savings, this also results in a more rigid frame enabling the down tube to be connected to the crankshaft housing with a larger diameter.
27,2 MM SEAT POSTSeat post with a diameter of 27.2 mm with excellent shock absorption.
CARBON DROPOUTSThe dropouts of the frame and front fork are made of carbon, thus an optimal connection to the rest of the frame can be assured with a low weight. The aluminium derailleur can be easily replaced if needed.